Expanding Hands Music LLC 2019
Hand-Crafted Tools To Stretch Your Sound
Q & A
Q: How do you wear “Funk Fingers”?
A: “Funk Fingers” are of unequal length. The longer one goes on your index finger, and the shorter on your longest finger. This allows easy playing on the same string. The curved wood goes on the pad of your finger, while the strap goes over the finger nail side of your finger. The straps should be tight enough to keep the “Funk Fingers” secure and not floppy but not so tight as to restrict blood circulation. It’s important to wear them securely so they don’t come off while you are playing. It is also a good idea to take them off and let your fingers relax a bit and not wear them continually without a reasonable break.
Q: I have an original pair “Funk Fingers.” What is the difference between the ones that Tony Levin sold and your new ones?
A: The main difference in the new “original” models is that Tony had the “Funk Fingers” logo printed in ink. I chose to brand or burn-in the logo. The difference should help maintain the collectability and value of the originals that Tony Levin sold. The only other difference is that some of the new ones are made from hickory and some are maple. I believe that Tony Levin’s were all hickory.
Q: Why are my “Funk Fingers” lighter or heavier than my friend’s “Funk Fingers”?
A: Wood varies in density even within the same piece of lumber, so that can cause weight variations. As mentioned earlier, some are made of hickory and others maple, and these woods have different weights.
Q: How and why did you start making “Funk Fingers”?
A: I fell into making "Funk Fingers" several months after meeting Tony Levin at a King Crimson centric music camp in 2011. Tony was experimenting at the time with wrapping different softer materials around the tips of his “Funk Fingers” to change the tone. When I returned home from the camp, I started experimenting with the “Funk Fingers” I had bought from Tony when he was selling them in the late 90s.
I began making “Funk Fingers” just for myself with different materials and tip shapes as well as a spare normal set. I made several normal sets and gave them to friends. In 2012, a few weeks before attending the second year of the music camp, I decided to make “Funk Fingers” and give them to everyone at camp since Tony had not sold them in about 12 years. Many people there encouraged me to make them to sell. Fast forward to now and I have a license agreement with Tony to make official "Funk Fingers".
RED “Funk Fingers” are a new model I developed that have a small amount of additional weight in the tip end for a different response. Tony never offered the RED model.
Funk Fingers ® Things of interest
*Both types of FFs will cause less string rattle when played near the bridge.
*Heavier gauge strings will respond with a more solid sound.
*It takes most people a little time to develop a good playing technique using FFs.
*Depending on how you set the tone controls on your bass you may want to cut the treble control a bit because of the sharper attack sound that FFs generate.
*Using a compressor with FFs helps your sound become more focused and punchy.
*Tony Levin prefers the added weight RED FFs these days, and he uses fairly heavy gauge strings.
*Sometimes I place a small piece of soft foam under the strings at the bridge, just thick enough to apply a gentle light damping to the strings.
About our bows
As you may have noticed, our bows are designed quite differently than traditional bow models. We are currently using poplar wood because of its light weight and vibrational character.
Our bows do not have the traditional flat ribbon of horse hair. In seeking to create a new way to tension the hair, moving away from the "Frog" system a traditional bow employs, I designed a new simple system. It is easy to adjust the hair tension to your preference and there is also a unique and somewhat organic look for the bows. A full "hank" of Mongolian horse hair is used and when properly rosined these bows draw unique and wonderful sounds. With proper care these bows can be re-haired and will last many years.
Q: Why don't you sell bow rosin?
A: We plan to sell rosin at some point in the future. Rosins are a fairly personal choice based on the player's technique and the way the rosin reacts to that technique. There are many rosins available and several are being tested at EHM. We are also inquiring with some artists which rosins they like and why.
Q: Can a Cymbow be re-haired if it needs it?
A: Yes it can. While there is not a current price listing for a Cymbow re-hair on the Cymbow page, the cost would be $15 plus shipping & handling.
Q: Are replacement thumbnuts and washers available if I lose mine?
A: Yes, If it is a rare event just email EHM with the request and we will send you one. However if you have a good hardware store that stocks a large variety of nut, bolt & screws near you it would be faster to go there. The thumb nut is an 8-32 thread.
Q :How tight should the strap be around my finger?
A: The strap should be tight enough not to flop around but not so tight that it hurts to wear.
Q: What is the difference between a right and left handed Finger Bow?
A: There is some contour filing and sanding in the wood to make it more comfortable for your knuckle. The difference between right & left is which side of the bow this contouring is on. Also the stretch Velcro strap would be installed in the reverse direction.
Q: What is the best way to store my Finger Bow?
A: The best way to store the Finger Bow when not in use is with most of the tension off of the thumbnut and in an area that often gets light. Leaving a small amount of tension on the thumbnut helps to keep it from vibrating off and getting lost. There are very small protein eating mites often called "Bow Bugs", they will eat the horse hair and they like darkness. Keeping your bow in an area that often gets light will help prevent these bugs from causing you problems.
Q: Can a Finger Bow be re-haired?
A: Yes it can. We can re-hair an Expanding Hands Music bow for $15 plus postage and handling.
Expanding Hands Music LLC, will never sell or share your contact information, period !
Q: What if I don't like the black rubber material on the tip of the cog handle, is it removable?
A: Yes, if you really work at it the rubber material can be peeled off. It is not a good idea to use anything sharp to scrape at it as this could damage the handle.
Q: What happens if I over tighten the string?
Q: Can the Zinger damage my cymbals?
A: We will answer this in a couple of ways.
In approximately 20 years of use Pete has never damaged any of his cymbals with Zinger use.
As with everything, the possibility does exist for damage if the user ignores obvious signs to modify use. To clarify, a thin cymbal that is consistently "Zinged" in the same spot could develop small notches in the cymbal edge. During prototyping and development of the Zinger lots of different types of cymbals were used as well as brands such as Zildjian, Paiste, Wuhan, etc.
It is the user's responsibility to inspect their cymbals and not always use the Zinger in the exact same location.
A: It is possible to break the Zinger if too much tension is on the string.
You will find that after a fairly tight tension additional string tightness does not change the Zinging tone.
Q: Is there only one correct way to use the Zinger on a cymbal?
A: No, various angles, circling motions, different speeds, and other methods can change the sounds. Cymbal brands, alloys, thickness, shape, edge contour and other factors also have a great effect of sound options.